ENGINE OIL REPLACEMENT <4A9> Mitsubishi ASX


1. Start the engine and allow it to warm up until the temperature of the coolant reaches 80 °C to 90 °C.
2. Warning: Use care as engine oil could be hot.
Remove the engine oil filler cap.
3. Remove the engine oil pan drain plug to drain engine oil.
4. Install a new engine oil pan drain plug gasket so that it faces in the direction shown in the illustration, and then tighten the engine oil pan drain plug to the specified torque.
Tightening torque: 39 ± 5 N·m

5. Refill with specified quantity of engine oil.
Specified Engine Oil
ACEA classification: A1/B1, A3/B3, A3/B4 or A5/B5
ILSAC classification: ILSAC certificated oil
API classification: SM
Total quantity (Includes volume inside engine oil filter): 4.2 L
Note:SAE 0W-20, 0W-30, 5W-30, and 5W-40 engine oils can only be used if they meet ACEA A3/B3, A3/B4 or A5/B5 and API SM specifications.

6. Install the engine oil filler cap.
7. Check engine oil level.

Инструкция по замене масла в двигателе Mitsubishi ASX 1.6 ==> M112100100330700ENG