Функционал системы MITSUBISHI Remote Control System
FUNCTION ==>M254970100002500ENG
The MITSUBISHI remote control system has the following functions:- Charging timer
- Remote climate control
- Displaying vehicle information
- Operating the vehicle
- Settings
- Activating the security alarm
- Charging the auxiliary battery
Note: Some detailed screens may be different from the actual screen due to periodic updates.
New function(s) may be added besides the functions mentioned above in the future.
CHARGING TIMER
Allows the driver to charge the drive battery automatically according to a predetermined schedule.
SCHEDULING
Allows the driver to schedule the battery charging per day. The timed charging can be selected from timers 1, 2, 3 or off. After the transmission button is pressed, the charging start/end time should be set and the registered location linked operation should be enabled/disabled for each of timers 1, 2, 3.
REMOTE CLIMATE CONTROL
Allows the driver to turn on the air conditioner prior to departure. To activate this system, the driver must select cooling or heating mode in advance. The remote climate control not only creates a more comfortable interior, but also suppresses the drive battery energy consumption during driving. When the defogger mode is selected, humidity can be removed from the windshield and rear window prior to departure.
SCHEDULING
The remote climate control schedule can be selected from timer 1, 2 and 3. These settings will be stored by touching the timer setting button.
Note: For activation conditions for the timed charging and the remote climate control, refer to the relevant Workshop Manual.
DISPLAYING VEHICLE INFORMATION
The current vehicle condition can be confirmed by pressing the vehicle information button.
OPERATING THE VEHICLE
Some electrical components such as lamps can be activated or deactivated by pressing the vehicle operation button.
SETTINGS
Allows the driver to customise the ETACS, deregister a wireless LAN device, and update the EV remote-ECU software.
ACTIVATING THE SECURITY ALARM
- When the security alarm is triggered while an application is working, a warning will be displayed immediately, and this event will be stored.
- When the security alarm is triggered while an application is not working, a warning will be displayed at the next time when the application is activated. The security alarm duration will be stored as history.
CHARGING THE AUXILIARY BATTERY
Charges the weak auxiliary battery from the drive battery. This battery charge will be performed every day.